In mining and other industries, it is necessary to use vibrating screen to screen materials. When the vibrating screen is used, it has a strong exciting force, and the material is also screened because of this exciting force. After using the vibrating screen for a period of time, the screen machine may have a problem of large beating. If the beating is serious, it may cause the side plate to break. Therefore, when this phenomenon is found, it should be solved immediately, but the first thing is to analyze the cause.

The reason for the large vibration of the vibrating screen

High frequency dehydration vibrating screen

1. The damping spring has high hardness
​​
If the hardness of the vibration damping spring is too large, it may not be able to achieve the effect of buffering, so the vibration screen will have a problem of large beating when it is running. Because the function of the damping spring is to connect the screen base and the screen frame, and it can also play a buffering role. Therefore, the hardness of the damping spring should not be too large.

2. Bearing radial clearance problem

If the radial clearance of the vibrating screen bearing is too small or too large, the bearing system will generate large vibration, and the whole vibrating screen machine will show a large beating phenomenon. When the radial clearance is too small, it will cause high frequency vibration; when the radial clearance is too large, it will cause low frequency vibration. If the radial clearance is too large, the radial natural frequency of the bearing elastic system will be reduced, resonance will easily occur, and large low-frequency vibration will be generated.

Details can be accessed by clicking here:https://www.hsd-industry.com/news/reasons-and-solutions-for-large-vibration-of-vibrating-screen/