The preload of the crossed roller bearing means that after the bearing is installed on the bearing seat and the shaft, certain measures are taken to produce a quantitative pre-deformation between the rolling elements in the bearing and the inner and outer rings, so as to keep the inner and outer rings in the same position. pressed state. The purpose of preloading the crossed roller bearing is to: increase the rigidity of the support; reduce vibration and noise; prevent the sliding of the rolling elements relative to the inner and outer raceways caused by the moment of inertia. Depending on the application, the bearing arrangement must have a positive or negative operating clearance. In most cases, the working clearance is positive, that is, when the bearing is running, there is a certain residual clearance, although it may be a small clearance.

On the other hand, there are many applications that require negative operating clearance—that is, negative preload—to increase the rigidity or rotational accuracy of the bearing arrangement. For example, spindle bearings of machine tools, CNC machine tool turntable bearings, thin-walled cross-roller bearings of robot arms, pinion bearings in automobile transmission shafts, small motor bearings, or bearing arrangements for reciprocating motion, etc. In some applications, if the imported bearing is under no or only small load, and operates at high speed, preload should be carried out on the bearing arrangement, such as by spring to carry out bearing preload. In this case, the role of preload is to provide a small load to the bearing to prevent the rolling elements from sliding and causing damage to the imported bearing.

crossed roller bearing

So what are the preload forms of the bearing?

The preload form can be radial or axial according to different bearing types. For example, cylindrical roller bearings, due to their design, can only be preloaded in the radial direction, while thrust ball bearings and thrust cylindrical roller bearings can only be preloaded in the axial direction. Single row angular contact ball bearings and tapered roller bearings are generally axially preloaded and are usually paired with another imported bearing of the same type back-to-back or face-to-face. And deep groove ball bearings are usually also subjected to axial preloading. In order to achieve the purpose of preloading, a radial internal clearance larger than that of the ordinary group should be used, so that it can have a larger than zero clearance like an angular contact ball bearing. Contact angle.

Details can be accessed by clicking here: