How to use diamond polishing pad

Diamond water (soft) grinding disc has a uniform specification of granular color and good flexibility. It is widely used in the processing of granite, marble, artificial stone and other lines, chamfers, countertops, curved plates and special-shaped stone. The shape and specification are optional, and the various grain sizes are distinguished by different colors. According to the needs and habits of the guests, various hand grinders, ground stone refurbished machines and ceramic polishing machines can be used flexibly.

As we all know, the diamond polishing pad can restore the ground to the luster, so how to use it correctly?

1. Thoroughly clean the ground. Use the knives to remove the concrete slurry from the stone gap and then thoroughly remove the dust with a brush, vacuum cleaner, etc. Use a dry and clean ground to clean and clean the ground without sand and impurities.

2. After the overall cleaning of the stone surface is completed, the small damaged points and the stone joints on each stone are repaired with marble glue. Firstly, the original damaged surface is repaired with marble glue close to the stone color. Then use a special stone slitting machine to re-align the slits of the original stone installation to make the width of the gap uniform, and then fill it with marble glue close to the stone color. After the marble glue is repaired, it must be dried before the glue can be dried.

3. After the marble glue is dried, use the sander to polish the whole ground, and polish the whole horizontally. Focus on the caulking between the stones and the edge of the wall, the decorative shape and the special shape to keep the whole stone floor level. Finish the first pass of the grinding, re-cast the marble glue, the caulking, and continue the second grinding. Then use the stone refurbished machine with the diamond polishing pad from coarse to fine. A total of seven grinding and polishing finishes are required. The whole is flat and smooth, and then polished with steel wool. The polishing degree reaches the brightness required by the design. There is no obvious gap between the stones.

4. After the polishing is completed, use the water suction machine to treat the moisture on the ground. At the same time, use the blow dryer to dry the whole stone floor. If time permits, you can also use natural air drying to keep the stone surface dry.

5. Spray the syrup evenly on the ground side. Grind it with a marble polishing machine. Use a washing machine with a red scouring pad. Sprinkle the syrup with the same amount of water on the ground. Start grinding and heat. Make the crystal surface material crystal on the surface of the stone. The surface effect formed after the formation.

6, the overall ground maintenance treatment: If the stone with a large gap is to be treated with a marble protective agent, re-grinding once to increase the hardness of the crystal surface of the entire ground.

7. Ground cleaning and maintenance: When the surface of the stone is crystallized, use a vacuum cleaner to absorb the residue and moisture on the ground. Finally, polish the surface with a polishing pad to make the whole surface completely dry. Bright as a mirror. If local damage is possible, local maintenance is possible. Construction can be done at any time.

The best diamond polishing pad manufacturers remind you that it is not enough to use diamond polishing pads. There are still several requirements to be aware of during use:

1. When working, the workpiece should be fixed, the profile positioning should conform to the direction of the knife, so as to avoid abnormal cutting, do not apply side pressure or curve cutting, the feed should be smooth, avoid the blade impact contact with the workpiece, resulting in damage to the diamond polishing pad. Or the workpiece flies out and an accident occurs.

2. When working, if the sound and vibration are abnormal, the cutting surface is rough, or the odor is generated, the operation must be terminated immediately, and the fault should be checked in time to eliminate the accident to avoid accidents.

3. When starting cutting and stopping cutting, do not feed the knife too fast to avoid broken teeth and damage.

4. If cutting aluminum alloy or other metal, use a special cooling lubricant to prevent the diamond polishing pad from overheating, causing paste, and other damage, which affects the cutting quality.

5. Equipment chip flute and slag suction device ensure smooth flow to prevent slag from forming into blocks, affecting production and safety.

6. When dry cutting, do not cut continuously for a long time, so as not to affect the service life and cutting effect of the diamond polishing pad. The wet sheet should be cut with water to prevent leakage.

/by

Resin polishing pad cleaning method description

Resin polishing pads are generally classified into ordinary resin grinding discs and super hard resin grinding wheels according to abrasive materials. Ordinary resin grinding wheel is a grinding wheel with white fused alumina, brown fused alumina and silicon carbide as the main grinding components. The super-hard resin grinding wheel is a grinding wheel with diamond or CBN as the main grinding part.

The polishing wheel must be carefully inspected and identified before installation. The steps to check the authentication are as follows:

1. Check that the slope of the grinding wheel is correct and that it meets the performance, shape and dimensions of all selected grinding wheels.

2. Check and determine the appearance of the grinding wheel. Look at the wheel for damage (or cracks) with your eyes. Do not use a grinding wheel that is damaged (or cracked). In addition, the ends of the grinding wheel are required to be flat and must be free of significant skew.

3. Check and identify the internal cracks in the grinding wheel. Use a hand-held grinding wheel and hit the wheel with a wooden hammer to hear the sound. The broken wheel made a crisp sound, and the broken wheel was hoarse and unusable.

Resin polishing pad cleaning method

In the production process, diamond wheels are used to polish the belt. Typically, the grinding wheel is removed for cleaning after 5-7 days of operation. (The above rubber crumb is polished and adhered to the surface of corundum after high temperature friction, which is difficult to clean)

Now we soak it in acetone for 2 hours and then clean it with an imported cleaner. The effect is very good, but it is not environmentally friendly and does not save energy.

Resin polishing pad cleaning requirements

1, to be environmentally friendly, does not contain ketones, can not be halogenated hydrocarbons.

2, can not damage the diamond wheel

/by

How to choose the size of concrete polishing pad

Many people are accustomed to using concrete polishing pads because the concrete polishing pads are deeper, are less prone to scratches, and are free of dust.

First: leveling

1. Surface treatment of old floor with good flatness: use 50#-200# concrete resin grinding disc according to ground hardness

2. Remove the loose surface layer of the old floor: Use 30#-100# resin grinding piece or 30#-100# metal grinding piece to easily remove the loose surface layer of the floor. It is recommended to use the medium and large floor grinding machine.

3. The surface treatment of the flatness with poor flatness: firstly leveling with 50# metal grinding disc, then rough grinding with 100# concrete resin grinding sheet, and finally grinding with 200# concrete resin.

4. Surface treatment of large-area repairing floor: It is recommended to use 50# metal grinding disc to grind and level before the ground is completely cured. After curing, use 100# concrete resin grinding disc to roughen and level, and accurately grasp the grinding timing to make the floor treatment. It’s simple and easy.

Second: rough grinding

1. terrazzo floor, concrete colored sand floor, uniform dry sand hardening agent floor: According to the hardness of the floor, the concrete resin grinding plate with particle size 30#-200# is coarsely ground, and the concrete resin grinding machine with particle size 200#-500# is used. The medium and large grinding machines for the sheet can improve the grinding efficiency and make the ground flatness better.

2. After the ground leveling treatment, select the high-granularity number (100#-500#) concrete dry grinding sheet coarse grinding resin polishing pad polishing pad

Third: fine grinding

1. Newly made aggregate hardener floor to maintain the surface effect of the original slurry: select the above-mentioned 500-size resin grinding plate or a small-sized grinding machine, and select the grinding piece with the corresponding grain size according to the surface hardness and curing time of the floor. A new floor with good mechanical light is easy to make a uniform surface effect.

2. Ground after rough grinding: Generally, the concrete grinding disc with the above-mentioned particle size of 500-1000 is selected for fine grinding treatment, and the matching medium and large grinding machine can be used to improve the grinding efficiency and make the ground flatness better.

Different concrete resin grinding discs in different situations

1. Polishing treatment: The grinding sheet suitable for the ground polishing treatment includes: a concrete resin polishing sheet polishing sheet having a particle size of 1000#-3000#. It is usually installed on a refurbished machine or a floor grinder. The polishing effect is related to the hardness, flatness and pre-treatment effect of the ground. The dry throwing effect is better.

2. Crystal surface treatment: The concrete polishing sheet has three granular numbers of 1000# 2000#3000#, which are used for polishing after the fine grinding of the floor. When using, choose a size number to polish according to the requirements. The most commonly used size number is 2000#, which is usually used on the floor grinder or refurbished machine. The wet throwing effect is better than the dry throwing light. It is recommended to use concrete brightener for floor surface treatment. After spraying the Tektron concrete brightener, using 2000# concrete polishing sheet, it is easy to bring a long-lasting and charming mirror effect.

Grinding life and grinding effect will be affected by various factors, including ground hardness, grinder weight, counterweight, speed, whether water and water, grinding type, quantity, particle size, grinding time and experience. It can be used with a variety of refurbished machines and grinders. It is suitable for medium and large grinding machines to improve the grinding efficiency and make the ground flatness better. Use concrete dry grinding without water grinding, otherwise use concrete polishing pad.

/by

Diamond polishing pad instructions

Diamond polishing pad has a uniform specification of granular color and good flexibility. It is widely used in the processing of granite, marble, quartz stone, artificial stone and other lines, chamfers, countertops, curved plates and special-shaped stone. Shape and specifications are optional.

Various particle size numbers are distinguished by different colors, 50# is blue, 150# yellow, 300# orange red, 500# deep red, 800# pink, 1000# green, 1500# brown, 2000# light green, 3000# white According to the needs and habits of the guests, it can be flexibly matched with various hand grinders, ground stone refurbished machines and ceramic polishing machines. When we grind the refurbished floor, we need to understand the requirements for the operation of the machine, as well as the requirements for the use of the diamond polishing pad, so that it can be safely and efficiently constructed.

Diamond polishing pad requirements

1. Check the mechanical equipment before work.

2. When working, the workpiece should be fixed, the profile positioning should conform to the direction of the knife, so as to avoid abnormal cutting, do not apply side pressure or curve cutting, the feed should be smooth, avoid the blade impact contact with the workpiece, resulting in damage to the water mill, or The workpiece flew out and an accident occurred.

3. When working, if abnormal sound and vibration are found, the cutting surface is rough, or the odor is generated, the operation must be terminated immediately, and the fault should be checked in time to eliminate the accident to avoid accidents.

4. When dry cutting, please do not cut continuously for a long time, so as not to affect the service life and cutting effect of the water-grinding sheet; when cutting the wet sheet, it should be cut with water to prevent leakage.

5. When starting cutting and stopping cutting, do not feed the knife too fast to avoid broken teeth and damage.

6. If cutting aluminum alloy or other metal, use a special cooling lubricant to overheat the waterproof sheet, produce paste, and other damage, affecting the cutting quality.

7. The equipment chip flute and slag suction device ensure smooth flow to prevent slag from forming into blocks, which affects production and safety.

Diamond polishing pad use method

The diamond polishing pad is suitable for portable electric or pneumatic mills, and then the joint is connected, the power is 750-1500W, and the number of revolutions is 2000-10000 rpm.

When working, the water is applied to the machine by a certain pressure on the surface of the stone to be polished 4-5 times, and the finer number one grinding piece can be replaced. Many people are accustomed to using water to grind tablets, because the water-grinding pieces are deeper, they are not prone to scratches and there is no dust. The dry grinding is relatively shallow, the dust is relatively large, and the scratches are more likely to occur.

A single water mill can’t satisfy all the different floors, especially the ground with extremely bad strength and serious sanding. This kind of ground can’t be blistered. If the water mill is afraid to see the loess, it doesn’t matter, you can choose dry grinding and grinding. As long as the ground is cleaned and no sand is brought into the chassis, there will be no scratches.

Diamond polishing pad use precautions

Diamond polishing pads are often used in angle grinders and floor refurbished machines. They are mainly polished and polished for various types of granite, marble and artificial stone. Of course, they are also suitable for renovation of stone on the ground, but in the process of grinding. It is necessary to add an appropriate amount of water for cooling. The main usage precautions can be divided into the following points:

First, it is often used to polish the inner arc, corner and outer arc of various special-shaped stone such as granite, concrete floor and marble;

Second, the sharpness of the diamond polishing pad is better, and the grinding speed is also fast, not only the luminosity is high and the glazing is fast;

Third, the degree of wear resistance is very high, and the service life is much longer, which is the comprehensive use performance and cost performance;

Fourth, if you are using a portable water polishing machine, remember that the entire speed of the motor can not be ≤ 4500 rpm;

Fifth, it is best to use different colors of stone. When choosing soft-grinding pieces, you must choose the color and stone close to each other;

Sixth, when we use soft grinding tablets, the correct way is to directly attach the surface with velvet to the joint, not only convenient but also very fast.

/by

Diamond polishing pad product introduction, installation method and development prospects

The diamond polishing pad is a flexible processing tool made of diamond as the abrasive and combined with the composite material. The back is affixed with a Velcro cloth, which is glued to the joint of the mill for grinding, and can be used for stone, ceramic and glass. , Floor tiles and other materials for profile processing, suitable for stone polishing, line chamfering, curved plate and shaped stone processing, can also be used for marble, coagulation, cement floor, terrazzo, glass-ceramic, artificial stone, floor tiles, glazed tiles, The special shape processing, repairing and refurbishing of vitrified bricks has strong grinding force, good durability, good softness, good definition and good gloss. It is an ideal stone grinding tool. The whole process is divided into coarse grinding, fine grinding and fine grinding. Four stages of grinding and polishing, the processed stone has a gloss of more than 90°.

The specifications of polishing pads commonly used in the market can be divided into: 3 inch, 4 inch, 5 inch, 6 inch, 7 inch, 8 inch thickness: 2.5mm, 3.0mm, 3.5mm; use high quality diamond abrasive grain, granularity by 30#, 50#, 80#, 100#, 120#, 150#, 200#, 300#, 400#, 500#, 600#, 800#, 1000#, 1500#, 2000#, 3000# are sequentially polished. Because of its strong grinding power, high polishing speed and high finish, it can effectively remove scratches and achieve the desired polishing effect.

At the same time, the diamond polishing pad has good water resistance and oil resistance, which can effectively reduce the time spent by the grinder. Because of its high abrasion resistance and longevity, the material of the stone grinding tool is greatly reduced, thereby effectively reducing the cost.

Main features of diamond polishing pad

1, it can not only improve product quality, but also applied to super-precision grinding and polishing, but also applied to stone processing such as artificial stone, granite and marble.

2, The particle distribution of the abrasive of this product is uniform, and the product of the same specification and the same particle size has little difference. It has the wear-resistant cutting characteristics of fixed abrasive such as grinding wheel and can achieve polishing precision.

3, has good strength and flexibility, suitable for grinding and polishing with water or oil as grinding media.

4, compared with ordinary soft polishing pad can improve the surface gloss in a short time; used for polishing of various curved and angular surfaces.

Diamond polishing pad installation method

From the current market point of view, diamond polishing pads have been recognized by many consumers, so some consumers do not know how to use diamond polishing pad, how to install it on the angle grinder when using it? First, we should remove the screw platen of the angle grinder. The second step is to correctly install the polishing pad on the angle grinder. The last step is to press the lock head, then tighten the reverse wire cover with a wrench, so the first one is installed. The steps are complete.

The next step is to prepare the construction. Check the equipment before construction and check if the spindle is deformed. There is no problem with the jump, whether the installation is firm, etc. Check whether the diamond polishing pad is complete, whether the polishing pad is as flat as when we purchased it, and whether there are other abnormal phenomena, so as to ensure safety and safety during construction. ,effectiveness. When assembling, make sure that the direction of the arrow of the diamond polishing pad and the direction of rotation of the device are the same. The reason why the arrow is marked by the manufacturer is for the user to install the polishing pad more clearly and clearly.

Be sure to proceed with safety before preparing to start the equipment. Equipment with single operation needs to check the movement of the point, turn to check whether the steering of the equipment is the same as before, there is no vibration, and the diamond polishing pad must be idling for a few minutes after it is installed, and there is no slipping when swinging. Or it is a phenomenon such as beating and then normal work. When working, the workpiece should be fixed and accurately positioned on the fixed platform, and then the construction should be carried out completely in accordance with the direction of the toothed path. This avoids the occurrence of abnormal cutting, and remembers during construction. Be sure to apply side pressure or curve cutting. Be careful when using it. This will avoid damage to the workpiece due to the impact of the blade. It can also prevent the diamond polishing pad from being damaged or the workpiece flying out.

Diamond polishing pad development prospects

Nowadays, diamond polishing pads are used more and more widely, mainly because diamond polishing pads have their own characteristics and advantages, which has prompted many consumers to favor the use of such polishing pads, and gradually began to understand the use of such polishing pads. The benefits, so according to the current market situation, the use of polishing pads will be more broad, many consumers have gradually changed the previous concept, because now consumers are more concerned about the quality of the product, and Polishing pads occupy most of the market with their own high quality advantages.

As far as the current market is concerned, the development prospect of diamond polishing pad will gradually increase, because high-tech products are widely used in application, and this polishing pad has won the praise of many consumers in the whole stone processing industry. However, how to open up a new market for soft polishing pads is still a big problem. If the scope of its use is properly broadened, it will be a good choice in the future development direction. First, we must focus on the economic development of the country. Some of the policy changes, the domestic economic development speed is getting faster and faster, the country has now attached importance to the total growth of the economy and turned into quality. This new way is undoubtedly an opportunity for the diamond polishing pad on the development road.

Some relatively large-scale economic growth, the country has begun to exclude, and countries like this new product will give more support, the most important thing is that the stock market is the focus of many manufacturers as the development direction, because China is a big country, region It is quite broad, so companies should focus more on the domestic market, but they still need to change according to changes in the market, constantly improve their products, more adapt to the needs of consumers for diamond polishing pads, and finally open up this international market. It is very necessary, because the domestic market, under the premise of stable development, we must continue to try to go abroad and export domestic products for export, so that we can effectively increase the sales of diamonds and the volume of international exports.

/by

How to choose a concrete polishing pad?

The whole process of concrete polishing pad can be divided into four stages: rough grinding, fine grinding, fine grinding and polishing. The processed stone has a gloss of more than 90°.

Since the construction site does not allow ash to be lifted, it can only be operated with water. Therefore, the water mill construction is beneficial to heat dissipation and lubrication scouring, which can extend the life of the mill and make the ground more uniform and delicate. Then, how to choose a concrete polishing pad?

1, The flatness of the ground:

Manually leveling the ground or loosening, seriously damaging the old ground, need to level or remove the loose surface, need to use a high-power grinder, use a concrete diamond grinding disc and other polishing machine, suitable for flat grinding.

Cement self-leveling grinders or polishing machines should find a better level of ground flatness. Only diamond resin grinding can make the polishing more beautiful and the grinding parts are more economical.

2, the hardness of the ground:

Concrete used in the design and construction of concrete floors is indicated by a label number, namely C20, C25, C30, etc. Under normal conditions, the higher the label, the better the strength and hardness of the concrete. However, due to various factors, the hardness of the concrete and the hardness of the ground often do not correspond.

The hardness of concrete floors is usually expressed in terms of molar hardness. The hardness of concrete slabs is usually between 3-5. At the site, we can use some alternative Morse hardness testers to understand the hardness of the ground: the hardness of the dent can be marked with nails and keys, otherwise the hardness is greater than 5.

3, the weight and speed of the grinder:

Grinders are usually divided into small, medium and large. In general, the larger the machine, the greater the power and the higher the efficiency; in actual use, the larger the machine, the higher the efficiency. Although the grinding efficiency is high, excessive grinding often leads to excessive grinding in use, which increases construction costs. According to the characteristics of the machine, experienced workers can adjust the speed, moving speed, the number and weight of the grinding machine, reduce construction costs and improve construction efficiency.

Finally, the hard flattening effect is better, and it is more suitable for medium and large grinding machines. The soft grinding disc has better polishing effect and is suitable for various grinding machines. It is recommended to use diamond grinding discs and thick grinding discs for leveling and rough grinding. Fine grinding discs are recommended for finishing and polishing.

/by

Diamond polishing pad application range

Diamond polishing pad is a flexible processing tool made of diamond as abrasive material combined with composite material. The back is affixed with Velcro cloth, which is glued to the joint of the mill for grinding, stone, ceramic, glass and floor tiles. Other materials for profile processing, suitable for stone polishing, line chamfering, curved plate and special-shaped stone processing, can also be used for marble, coagulation, cement floor, terrazzo, glass-ceramic, artificial stone, floor tile, glazed tile, vitrification The special processing, repairing and refurbishing of bricks has the advantages of strong grinding force, good durability, good softness, good definition and good gloss. It is an ideal stone grinding tool. The whole process is divided into coarse grinding, fine grinding and fine grinding. Polished in four stages, the processed stone has a gloss of over 90°.

Diamond polishing pad is made of high-quality diamond micro-powder and resin bond material, with exquisite technology and advanced production technology. It is mainly used for polishing and polishing natural stone or artificial stone of various shapes. It can also be used for decorative stone cleaning, dressing and polishing. Update. According to the needs and habits of customers, it can be flexibly matched with various hand grinders, floor refurbished machines, ceramic polishing machines, angle grinders, floor grinders, etc.

Application range

1. It can be applied to different places such as new and old concrete floors, terrazzo floors and diamond floors, and different polishing targets can be selected according to different needs of customers. The brightness of the polishing can reach more than 90 degrees.

2. It is used for the renovation of concrete floors, warehouses, parking lots and other concrete floors or various aggregate hardener floors, especially the current hardened dustproof seal curing agent floor, which can be flexibly matched with various hands according to needs and habits. For grinding or refurbished machines, use different sizes of grinding discs for coarse grinding, fine grinding, fine grinding and polishing.

3. For the grinding and polishing of ceramic tiles, the tile manufacturer is equipped with manual, automatic full-throwing machine and semi-polishing machine for the full-throwing and semi-polishing treatment of microcrystalline bricks, glazed tiles and antique bricks. The brightness of the smooth surface can reach more than 90; it can be used for ground treatment and refurbishment of microcrystalline bricks and various ceramic tiles. It can be flexibly matched with various hand grinders or refurbished machines according to needs and habits.

4. It can be used for the treatment and renovation of various floors and steps after laying granite, marble and artificial stone plates. It can be flexibly matched with various hand grinders or refurbished machines according to needs and habits.

Diamond polishing pad specifications

Specifications: 3 inch, 4 inch, 5 inch, 6 inch, 7 inch, 8 inch

Thickness: 2.5mm, 3.0mm, 3.5mm;

Particle size: 30#, 50#, 80#, 100#, 120#, 150#, 200#, 300#, 400#, 500#, 600#, 800#, 1000#, 1500#, 2000#, 3000#

Diamond polishing pad features:

1. Unique resin binder with strong grinding force;

2, the polishing speed is fast and the finish is high;

3, high wear resistance, long service life;

4. No scratches and color left on the stone after grinding and polishing (not easy to dye).

/by

Marble polishing pad instructions

Marble polishing pads are believed to be familiar to everyone. Because marble floors are widely used in public places, shopping malls, supermarkets, etc., due to the large number of people, it is inevitable that the marble floor will wear out over time. At this time, marble polishing pads will be used, and the ground needs to be refurbished. When it comes to this, many people have already basically understood this product, but after all, there are still many people who are confused about the use of this product. Know how to use it to achieve the effect of ground renovation.

This article will explain and describe in detail how to use and use the polishing pad from each step used in the marble polishing pad.

Marble polishing pad use

1. Thoroughly clean the ground. Use the knives to remove the concrete slurry from the stone gap and then thoroughly remove the dust with a brush, vacuum cleaner, etc. Use a dry and clean ground to clean and clean the ground without sand and impurities.

2. After the overall cleaning of the stone surface is completed, the small damaged points and the stone joints on each stone are repaired with marble glue. Firstly, the original damaged surface is repaired with marble glue close to the stone color. Then use a special stone slitting machine to re-align the slits of the original stone installation to make the width of the gap uniform, and then fill it with marble glue close to the stone color. After the marble glue is repaired, it must be dried before the glue can be dried.

3. After the marble glue is dried, use the sander to polish the whole ground, and polish the whole horizontally. Focus on the caulking between the stones and the edge of the wall, the decorative shape and the special shape to keep the whole stone floor level. Finish the first time of polishing, re-cast the marble glue, insert the seam, complete the second grinding, then use the stone refurbished machine with the steel stone grinding disc from coarse to fine, a total of seven grinding and polishing is required. The whole surface is flat and smooth, and then polished with steel wool. The polishing degree reaches the brightness required by the design. There is no obvious gap between the stones.

4. After the polishing is completed, use the water suction machine to treat the moisture on the ground. At the same time, use the blow dryer to dry the whole stone floor. If time permits, you can also use natural air drying to keep the stone surface dry.

5. Spray the syrup evenly on the ground side. Grind it with a marble polishing machine. Use a washing machine with a red scouring pad. Sprinkle the syrup with the same amount of water on the ground. Start grinding and heat. Make the crystal surface material crystal on the surface of the stone. The surface effect formed after the formation.

6, the overall ground maintenance treatment: If the stone with a large gap is to be treated with a marble protective agent, re-grinding once to increase the hardness of the crystal surface of the entire ground.

7. Ground cleaning and maintenance: When the surface of the stone is crystallized, use a vacuum cleaner to absorb the residue and moisture on the ground. Finally, polish the surface with a polishing pad to make the whole surface completely dry. Bright as a mirror. If local damage is possible, local maintenance is possible. Construction can be done at any time.

/by

Polishing pad model size

Tianbang diamond soft grinding disc is used for grinding and polishing ceramic tiles. The ceramic tile manufacturer is equipped with manual, automatic full throwing machine and semi-polishing machine for all throwing and semi-polishing treatment of microcrystalline brick, glazed brick and antique brick. Glossy and matt Arbitrarily, the brightness of the smooth surface can reach more than 90; it can be used for ground treatment and refurbishment of microcrystalline bricks and various ceramic tiles. It can be flexibly matched with various hand grinders or refurbished machines according to needs and habits. The following introduces you to the size parameters of various polishing pads, for your reference!

(1) Polishing pad

1. Resin material, mainly used for processing and polishing of special-shaped stone.

2. Grinding sequence: from coarse to fine, and finally polished

3. Particle size 1: 80#, 150#, 300#, 500#, 1000#, 2000#, 3000#, polishing

Particle size 2:50#,100#,200#,400#,800#,1500#,3000#, polishing

(2) Marble renovation

1. Suitable for marble renovation

2. Particle size: 50#,100#,200#,400#,800#1500#,3000#

(3) Dry grinding tablets

1. Resin material, mainly used for processing and polishing of special-shaped stone.

2. Grinding sequence: from coarse to fine, and finally polished

3. Particle size 1: 80#, 150#, 300#, 500#, 1000#, 2000#, 3000#, polishing

Particle size 2:50#,100#,200#,400#,800#,1500#,3000#, polishing

(4) Elastic grinding disc

Particle size 80mm: 120# 500# 1000# 2000# 6000#

100mm:500# 1000# 2000# 6000#

200mm:1000# 2000# 6000#

Characteristics: Soft grinding disc has high grinding efficiency and good softness. It can process stone products and ceramics of various shapes for marble polishing.

(5) Shaped water-grinding tablets

1. Resin material, mainly used for processing and polishing of special-shaped stone.

2. Grinding sequence: from coarse to fine, and finally polished

3. Particle size 1: 80#, 150#, 300#, 500#, 1000#, 2000#, 3000#, polishing

Particle size 2:50#,100#,200#,400#,800#,1500#,3000#, polishing

(6) polishing pad

Black: stone cleaning

Red: waxing of stone and floor, making crystal faces

White: Polishing of stone

(7) Soft abrasive joint

Floor grinder and hand-held disc sander

Common specifications for diamond resin soft-grinding discs are as follows

Diameter

Granularity

Thickness

Type of use

80mm(3″)

1:50# 100# 200# 400#

2.2mm

Dry grinding/

Wet grinding

100mm(4″)

800# 1500# 3000# Buff

2.2mm

125mm(5″)

2:50# 150# 300# 500#

2.3mm

150mm(6″)

1000# 2000# 3000# Buff

2.5mm
/by

Steps to renovate the floor refurbishment

Stone refurbishment is part of stone maintenance and consists of three steps: rough grinding, fine grinding and polishing. The steps of renovating the floor refurbishment floor, each step is carried out with the use of diamond abrasives.

1. Rough grinding will remove scratches, corrosion, and traffic marks on the surface.

2, fine grinding, smoothing the ground and grinding the surface.

3. Polished, diamond abrasive will polish the surface. The water is constantly flowing as a lubricant for diamond.

The specific operation details have the following parts:

1. Base treatment:

(1) The large terrazzo machine is equipped with a coarse diamond grinding head water mill to smooth the ground and completely remove the epoxy resin coating.

(2) The large terrazzo machine is equipped with a fine grinding head water mill to ensure a smoother and smoother surface.

(3) Wash and remove clear water, and dry naturally for 3-7 days.

2, cement floor sanding agent A component construction

(1) Dilute component A with appropriate amount of water on the ground according to the ground conditions. The amount of raw liquid: 0.2-0.5kg/m2.

(2) When the surface has no clear water or becomes viscous, spray a small amount of water in time to keep the surface moist to promote penetration. The above operation lasts for about 4 hours. Finally, rinse the surface with enough water to remove the surface water and dry naturally. More than an hour;

(3) If the ground strength is poor, repeat the above steps after 24 hours.

3, cement floor sanding agent B component construction

(1) spraying the component B solution, the dosage is about 0.2-0.5kg/m2;

(2) When there is no clear water on the surface layer, spray a small amount of water in a timely manner, keep it moist for about 4 hours, and finally rinse with plenty of water (preferably rinse with a hard brush while washing), and remove the surface water, and dry naturally.

For the above 2 and 3 steps, it is best to use an electric washing machine with a high-power water absorbing machine for higher efficiency and better appearance.

Tianbang floor renovation film manufacturer is a manufacturer of diamond tools with more than 20 years of professional technology. Our company has strong technical strength and professional technical engineers and technicians. It has strong innovation and development capabilities to meet the needs of consumers.

/by