Entries by TB垫

How to choose a concrete polishing pad?

The whole process of concrete polishing pad can be divided into four stages: rough grinding, fine grinding, fine grinding and polishing. The processed stone has a gloss of more than 90°. Since the construction site does not allow ash to be lifted, it can only be operated with water. Therefore, the water mill construction is […]

2019-04-23 by

Diamond polishing pad application range

Diamond polishing pad is a flexible processing tool made of diamond as abrasive material combined with composite material. The back is affixed with Velcro cloth, which is glued to the joint of the mill for grinding, stone, ceramic, glass and floor tiles. Other materials for profile processing, suitable for stone polishing, line chamfering, curved plate […]

2019-04-16 by

Marble polishing pad instructions

Marble polishing pads are believed to be familiar to everyone. Because marble floors are widely used in public places, shopping malls, supermarkets, etc., due to the large number of people, it is inevitable that the marble floor will wear out over time. At this time, marble polishing pads will be used, and the ground needs […]

2019-04-09 by

Polishing pad model size

Tianbang diamond soft grinding disc is used for grinding and polishing ceramic tiles. The ceramic tile manufacturer is equipped with manual, automatic full throwing machine and semi-polishing machine for all throwing and semi-polishing treatment of microcrystalline brick, glazed brick and antique brick. Glossy and matt Arbitrarily, the brightness of the smooth surface can reach more […]

2019-03-26 by

Steps to renovate the floor refurbishment

Stone refurbishment is part of stone maintenance and consists of three steps: rough grinding, fine grinding and polishing. The steps of renovating the floor refurbishment floor, each step is carried out with the use of diamond abrasives. 1. Rough grinding will remove scratches, corrosion, and traffic marks on the surface. 2, fine grinding, smoothing the […]

2019-03-26 by

Marble polishing renovation method

Grinding and polishing of marble grinding blocks is the first process of stone care crystal surface treatment. The weathering resistance is poor, so the worn surface is easy to lose luster. The marble can be refurbished according to the degree of wear on the marble surface, with a mild, medium and deep marble grinding and […]

2019-03-26 by

How to choose the cutting blade?

Many of the peers who do stone care, when choosing the initial grinding sheet, are often selected according to the height of the ground cut. When we conduct on-site inspection, we find that the height of the panel is mostly above 3MM. The 30-mesh grinding disc will be selected for the trimming and smoothing treatment. […]

2019-03-26 by