5 inch diamond polishing pads

Trade information

MOQ: 3000 pieces

The thickness of the grinding discs are:   3mm.5mm.6mm, 8mm, 12mm.

 

Wholesale prices:

3 mm unit price of 1.5 US dollars;

6 mm unit price 2 US dollars;

8 mm unit price of 2.5 US dollars;

12 mm unit price of 3 US dollars;

5 inch diamond polishing pad is a flexible processing tool made of diamond as an abrasive and combined with composite material. The back is affixed with Velcro cloth, which is glued to the joint of the mill for grinding, and can be used for stone and ceramic. Glass, floor tiles and other materials for profile processing, suitable for stone polishing, line chamfering, curved plate and shaped stone processing, can also be used for marble, coagulation, cement floor, terrazzo, glass-ceramic, artificial stone, floor tile, glazed tile The special-shaped processing, repairing and refurbishing of vitrified bricks has strong grinding force, good durability, good softness, good definition and good gloss. It is an ideal stone grinding tool. The whole process is divided into coarse grinding and fine grinding. Four stages of fine grinding and polishing, the processed stone has a gloss of more than 90°.

Category	coarse grinding	Fine grinding	Precision grinding	Polishing
5 inch diamond polishing pads	30 mesh、50 mesh、150 mesh	200 mesh、300 mesh	500 mesh、800 mesh	1000 mesh、2000 mesh、3000 mesh
Consumption (rough cement surface)	30m2 per piece	35m2 per piece	60m2 per piece	200m2 per piece
Consumption (normal cement surface)	45m2 per piece	45m2 per piece	70m2 per piece	200m2 per piece
Consumption (hard ground)	45m2 per piece	45m2 per piece	70m2 per piece	200m2 per piece

note:

1. The above dosage is the theoretical consumption, and the actual consumption will vary according to the strength and flatness of the base surface;
2. The above dosage is the consumption of grinding with a light scrubber. If you use high-speed grinding equipment, the dosage will change greatly.

The 5 inch diamond polishing pad is used for the treatment and renovation of various floors and steps after laying granite, marble and artificial stone. It can be flexibly matched with various hand grinders or refurbished machines according to needs and habits. In addition, it can also be used for the grinding and polishing of ceramic tiles. The ceramic tile manufacturers are equipped with manual, automatic full-throwing machines and semi-polishing machines for the full-throwing and semi-polishing treatment of microcrystalline bricks, glazed tiles and antique bricks. Arbitrarily, the brightness of the smooth surface can reach more than 90; it can be used for ground treatment and refurbishment of microcrystalline bricks and various ceramic tiles. It can be flexibly matched with various hand grinders or refurbished machines according to needs and habits.